MAZDA RX8 2004-2008 ALL VERTICAL LAMBO DOOR CONVERSION KIT

  • Model: VDCMAZRX80408
  • Shipping Weight: 80lbs
  • 5 Units in Stock
  • Manufactured by: Vertical Doors, Inc.
$1,199.00
Qty :
+
-

YOU ARE BUYING THE

MAZDA RX8 2004-2008 ALL VERTICAL LAMBO DOOR CONVERSION KIT

MAKE - MAZDA
MODEL - RX8
YEAR - 2004-2008
TRIM - ALL
With a Vertical Doors, Inc., kit, your ride will keep its factory look and feel while you are driving but the moment you stop and raised your doors you will experience a whole new level of attention that no other upgrade can give you.

Vertical Doors, Inc., kits are proudly made and patented in the United States and are bolt-on kits made specifically for your particular vehicle.

They only manufacture the best kits, best quality, best customer service, strongest kits, and most affordable kit for the quality.

Our line-up includes all the major vehicle manufactures.

This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.

Not only are our kit easy to install but they are also easy to operate, basically open your door like normal until it stops, at a predetermined position and then just raised your door up until it stops.

You also have the option of not raising the door since unlike most Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc, imitators; our Vertical Doors, Inc., kits will allow you to get in and out without having to raise your doors.

This system is everything you need for a successful, reliable and cost effective Vertical Door conversion in a minimum amount of time.

Vertical Doors are also known as Lambo Doors, Lambo Door Kits, Lambo Doors Conversion Kits, Lambo Door Hinges, Lambo Style Hinge Kits, LSD, VDC, VDI, VDC Kits, VLS, Upright Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, or Evo Doors

This system is everything you need for a successful, reliable and cost effective Verticle Door conversion in a minimum amount of time.

The Verticle Door Conversion Kit includes

  • Drive's and Passenger's Side Direct Bolt-on Lambo Door Kit.
  • Heavy Duty Gas shock, (Pressurized for your specific automobile)
  • Installation Instructions

The Verticle Door Conversion Kit  Features:

  • Heavy duty constructions
  • Easy installation
  • Fully reversible
  • Heavy Duty German made shocks (Beware of other sellers using low quality shocks)
  • Direct bolt on construction
  • Made by Vertical Doors, Inc.

We have 100's of kits in stock that will fit most of the major automobile manufacturers.

When placing your order please make sure to include:

  • Make
  • Model (2 door or 4 door)
  • Exact Year
  • Any modifications to the body and/or the door
  • Telephone number where the shipping company can contact you..(just in case)

This Vertical Doors, Inc., product is covered under one or more of the following U.S.A patents #7,552,514; #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending.

We carry the full line of Direct "Bolt-on" Vertical Lambo Door conversion kits from “Vertical Doors, Inc.” and “Bolt-onLamboDoors” we also carry "Weld-on" universal kits

Manufacturer's Warranty:
  • All Vertical Doors Inc systems are backed up by a limited Lifetime warranty.
  • The shocks have a warranty for 6 months, if you need a file warranty claim, you must have the original invoice to make the warranty valid.
 
ShopSFM Special Warranty:
If you buy the kit and the installation from ShopSFM your warranty will be upgraded to:
  • limited Lifetime warranty on the hinge
  • limited Lifetime warranty on the shock
  • Lifetime warranty on the installation
  • NOTE: Installation will be done at 1240 Graphite Dr. Corona CA 92881
"IF YOU LIVE NEAR CORONA CALIFORNIA INSTALLATION CAN BE ARRANGED FOR A MINIMAL CHARGE"
HERE ARE A COUPLE OF TECH TIPS FROM SHOP SFM
  • Do not take Door off during installation Please follow the detailed instruction manual step by step
  • Use 2" painters tape to mark the factory location of your door on the horizontal and vertical plane also measure the distance between the apron and the front edge of the door by the botton and top hinge.  
  • Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat.
  • Make sure both allen screw adjustment on each system are adjusted accordingly.  
  • The kit requires no modification, the kit is a bolt on, but MOST INNER FENDERS MUST BE ROLLED OR TRIMMED.  
Shock Maintenance - IMPORTANT STEP - Do not skip this step!

This step is crucial in your installation process, if this step is not completed when installing your vertical door kit; all warranties are voided and may cause future problems with your vehicle.

Make sure you put grease on the body of the shoulder bold where arrow is pointing Shock Greasing Instructions

  • Make sure you use RED Loctite where the arrow is pointing, on the tread of the shoulder bolt.
  • Make sure you put grease on the bottom side of the shock end.
  • It is recommended that every 3 - 6 months all parts of hinge be sprayed with lubricant to ensure smooth hinge operation.


Warning the use of any pliers, paint or foreign materials on shocks body or shaft will Void the Warranty.

Use No Pliers


 
INNER FENDER TRIMMING: 
  • We preffer to trim the inner fender.
  • Make sure to trim a tittle at a time, you only need to trim enough to allow the swing arm to open and move up and down. 
PLEASE INSPECT ALL PACKAGES IMMEDIATELY AND NOTE ANY DAMAGE ON THE DELIVERY RECEIPT.

The majority of products available at Shop SFM are returnable but you most request a ?Return Authorization Number? (RA #) within 7 days of receipt of the product. All items must have an authorized RA # and be received in a new, unused and ready-to-sell condition (including all original packaging, parts, and paperwork) to receive a refund, please note shipping and handling costs are not refundable.

Shop SFM does not accept returns on used items, custom made or custom-painted products or items shipped via truck freight. International orders cannot be returned or exchanged unless the item is defective or in the case of an error on our part. Shop SFM will not reimburse labor charges or installation fees under any circumstances. All returns are subject to a 25% restocking fee, plus any shipping charges. Any credit card or online order that is cancelled prior to shipment will be charge at least 5% transaction fee. Orders placed using PayPal must pass an inspection before any credit will be issued.

MAKE SURE YOU ASK THESE QUESTIONS BEFORE YOU PURCHASE ANY LAMBO DOOR KIT!

1. IS IT A DIRECT BOLT-ON?
(Weld-on kits may damage your vehicle and they are NOT vehicle specific)

2. DOES THIS KIT BOLT DIRECTLY TO THE FACTORY HINGE HOLES ON MY VEHICLE?
(If they say “NO”, the installation will be difficult and/or expensive)

3. DOES THIS LAMBO DOOR KIT COME COMPLETE WITH HARDWARE, SHOCKS AND DIRECTIONS?
Some sellers will mislead you and say “Weld-on” installation is easy and that there universal style kits is made for your particular vehicle.)

4. CAN YOU ACTUALLY TALK TO A SELLER?
(Many times you will get “0” Support after the sale)

WE ARE HERE MONDAY - FRIDAY 8AM TO 4:30PM WE WANT YOU TO ASK QUESTIONS,
SO CALL US AT 951-340-9469 OR YOU CAN REACH US VIA EMAIL.

Servicio en Español disponible

If you have any questions about this product or any product we sell - Please Call 951-340-9469
We will be glad to answer any questions!